Liquid Master​ Ideal for Sampling Various Liquids

LIQUID SAMPLERS QAQC LAB
QAQC LAB LIQUID MASTER SAMPLER 
QAQC LAB LIQUID SAMPLER FOR LOW AND MEDIUM VISCOSITY CROSS SECTIONAL AND POINT LIQUID SAMPLING 675 5035
Type: Single Point & Cross Sectional 

Operation:

Technique 1 -    Point Sampling Insert  the  sampler.  
                          Press  the  push  button  to  take sample. 
                          Remove the sampler.


Technique 2 -    Cross Sectional
                          Press  the  Push  Button  and  then  slowly  insert  the sampler into the product.  
                          As the sampler is pushed in a cross  sectional sample is taken. Release 
                          the push button at the required depth to stop any more liquid from entering                                the sampler. Remove the sampler.

                          NOTE: To take a large sample the sampler needs to be inserted 
                                      deep into the product.
AVAILABLE IN: 

PTFE/ MFA- a semi-crystalline fully-fluorinated melt processable fluoropolymer which offers the highest temperature rating, and broadest chemical resistance of all melt processable fluoropolymers. It is an ideal choice for extreme thermal and chemical environments.

PTFE/FEP- TetraFluorEthylene-Perfluorpropylene is a relatively soft thermoplastic with lower tensile strength, wear resistance, and creep resistance than many other engineering plastics. However, it is chemically inert and has a low dielectric constant over a wide frequency range. FEP possesses a very high degree of stress crack resistance, a low coefficient of friction, exceptional dielectric properties, heat resistance, retention of properties after service at 400°F (204°C) with useful properties at -454°F (-270°C), and meets FDA 21CFR.177.1550. 

STAINLESS STEEL 316- Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

POLYPROPYLENE- is a thermoplastic polymer used in a wide variety of applications including packaging and labeling, textiles (e.g., ropes, thermal underwear and carpets), stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes. It is rugged and unusually resistant to many chemical solvents, bases and acids.
PURCHASE ONLINE
liquid master sampler
SEAL PREVENTS SAMPLE 
FROM DRIPPING FROM TIP
liquid master sampler
PRESS BUTTON TO 
TAKE SAMPLE
liquid master sampler
675 5035J 1000          PTFE/MFA           1000 mm                     500ml*                    35 mm
675 5035J 1500          PTFE/MFA            1500 mm                    1000ml*                   35 mm
675 5035J 2000          PTFE/MFA           2000 mm                    1500ml*                   35 mm


675 5035S 600            316 SS                  600 mm                     150ml**                    25 mm
675 5035S 1000          316 SS                1000 mm                     270ml**                    25 mm
675 5035S 1500          316 SS                1500 mm                     420ml**                    25 mm


675 5035T 600            PTFE/FEP             600 mm                     150ml**                     25 mm
675 5035T 1000          PTFE/FEP           1000 mm                     270ml**                     25 mm
675 5035T 2000          PTFE/FEP            2000 mm                    420ml**                     25 mm


675 5035P 600            PP                       600  mm                     150ml**                      25 mm
675 5035P 1000          PP                      1000  mm                     270ml**                     25 mm
675 5035P 2000          PP                       2000 mm                    420ml**                      25 mm
REF#                          MATERIAL         LENGTH                     CAPACITY             DIAMETER    
BROCHURE
logo
logo
EQUIPMENT FOR QUALITY CONTROL AND R&D 
www.qclabequipment.com
Telephone      (804) 318-3686
Toll Free US    (866) 244 1578
Fax                   (703) 991-7133
Hours      8 AM - 6 PM EST
INTERNATIONAL & DOMESTIC SALES
CUSTOMER SERVICE * SALES * TECHNICAL SUPPORT


DELIVERIES WORLDWIDE

PERFORMANCE GUARANTEE
liquid master
liquid master sampler
liquid master sampler
PTFE FEP
PTFE MFA
STAINLESS STEEL (SILICONE ORING)
The Liquid Master is easy to use and is designed to be quickly stripped down for cleaning.
visa mc logo
MANUFACTURING
DISTRIBUTION
TECHNICAL SERVICES ​FOR
ANALYTICAL INSTRUMENTATION

TELEPHONE (804) 318-3686
TOLL FREE   (866) 244-1578

COMPLETE INTERACTIVE SAMPLER CATALOGUE
PDF DOWNLOAD
SPECIFICATION SHEETS
QUICK QUOTE
STORE SEARCH
The Liquid Master is ideal for taking samples from low and medium viscosity liquids. It is available in a range of lengths and diameters to give a range of sample volumes.
qaqc lab stainless steel liquid master sampler
QAQC LAB LOGO
WHITESTONE VA
TEL (804) 318-3686 FAX (703) 991-7133
[email protected] 
WWW.QCLABEQUIPMENT.COM
QAQC LAB LOGO
Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved.
804-318-3686 | [email protected]